March 2004
| 3/31/04 |
Rebarreling a Colt .45 Gold Cup, Barrel Clearance Cut  posted by johnstranahanb (0 comments)I did this project a while ago. The project was to accurize a used Colt .45 Gold Cup. I selec... |
|
|
| 3/30/04 |
Making a T-slot posted by johnstranahanb (0 comments) Note that some topics are now hidden. Use the purple "older entries" at top right or bottom t... |
|
|
| 3/25/04 |
Homade Die Head for the Lathe or Mill posted by johnstranahanb (2 comments) The |
|
|
| 3/24/04 |
Homemade Indicator Extension posted by johnstranahanb (0 comments) This project is well suited to a collet chuck. |
|
|
| 3/20/04 |
Setting an Accurate Angle on the Compound Rest/Regrinding a Bull Nose Center posted by johnstranahanb (0 comments) |