June 2004
| 6/28/04 |
Finished Fifth Column, Heavy Duty Lathe Bench  posted by johnstranahanb (0 comments)F |
|
|
| 6/26/04 |
Scraping the Slotted Plate Flat posted by johnstranahanb (0 comments) M |
|
|
| 6/23/04 |
Milling a 3/4 inch Slot and Surfacing the Plate posted by johnstranahanb (0 comments) T |
|
|
| 6/20/04 |
Drilling an Accurately Placed Hole. Slotted Plate Continued. posted by johnstranahanb (0 comments) T |
|
|
| 6/8/04 |
Drill and Counterbore 1 inch Square Stock posted by johnstranahanb (0 comments) 1 |
|
|
| 6/6/04 |
Transfer Screw (Making and Use) posted by johnstranahanb (0 comments) T |
|
|
| 6/5/04 |
Aligning (Tramming) the Mill Head posted by johnstranahanb (0 comments) T |
|
|
| 6/5/04 |
Grinding and Scraping the Cross-Arm Face True posted by johnstranahanb (0 comments) G |